5/29/2023 0 Comments Imax b6 charger usb softwareThe ToolkitRC M6 is an ultra small device weighing only 80 grams used to charge your batteries at home or in the field with declared charging power of 150 Watts or 10 Amps. The back of the ToolkitRC M6 is characterised with a circular fan opening and two small collapsable legs used to lift the charger from the ground in order to provide better air circulation for the built in fan. On the right side there is an output XT60 connector along with a 6S output balance lead. The ToolkitRC M6 input voltage ranges from 7 to 28 Volts. The servo port is used for testing the PWM, PPM and SBUS in the measuring and output menus. The USB port can be used for powering and charging USB devices with up to 2.1 Amps and updating the charger firmware. The ToolkitRC M6 is powered through a male XT60 input connector that could be found on the left side of the charger along with a USB connector and servo connector. Both of them retail for around $23 but the ToolkitRC M6 has much more to offer since it is not just a charger, it is more like the brand names says Toolkit for RC enthusiasts. Well now it has a competition and the ToolkitRC M6 is here to replace it. When it comes to cheap chargers for a long time the iMAX B6 was the charger to go for all RC enthusiasts getting into the hobby.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
June 2023
Categories |